Applied-motion STM23R-2ND Manuel d'utilisateur télécharger pdf (Page 6)

STM23R Hardware Manual

920-0056C

5/5/2015

Mounting the STM23R

You can mount your motor+drive using four #6 or #8 screws. If possible, the motor+drive should be securely

fastened to a smooth, at metal surface that will help conduct heat away from the motor. If this is not possible,

then forced airow from a fan may be required to prevent the STM23R from overheating. See page 24 for

more details about heating.

• Never use your motor+drive in a space where there is no air ow or where other devices cause

the surrounding air to be more than 40°C.

• Never put the STM23R where it can get wet or where metal or other electrically conductive par-

ticles can get on the circuitry.

• Always provide air ow around the drive. When mounting multiple STM23R’s near each other,

maintain at least one half inch of space between them.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

Applied-motion STM23R-2ND Manuel d'utilisateur Page 6